The Traxxas 1/18 scale TXC-4M™ Extreme Crawler revolutionizes RC crawling with its clean-sheet approach. An all-new monocoque chassis allowed Traxxas engineers to position the electronics and suspension for optimal weight distribution and geometry. The result is a radical new design with huge forward weight bias and massive ground clearance. Outfitted with only the best parts, TXC-4M delivers the competition-grade performance and extreme fun that could only come from Traxxas.

3s Brushless Power
An extreme crawler needs an extreme power system and TXC-4M delivers with 11.1 volts of brushless 3s LiPo power. 3s power allows TXC-4M to run a high-reduction driveline for ultra-precise throttle control and exceptional torque with crawling speeds so low the rig appears motionless.

Rigid Monocoque Chassis
TXC-4M is purpose-built to deliver the ultimate crawling experience, due in part to its all-new chassis. TXC-4M’s monocoque chassis is both significantly lighter and more rigid than a traditional ladder frame. With no chassis flex, TXC-4M tracks straight and true even under extreme articulation.

Competition-Grade Steering
TXC-4M delivers competition-grade steering performance with an exceptional 60° steering angle, tight turning radius, and laterally mounted 2265 metal-gear servo with 75 oz-in of torque. High-clearance steering and drag links allow TXC-4M to tackle the toughest lines without getting hung up on the rocks.

Portal Axles
Portal axles lift TXC-4M at the wheels, giving it more ground clearance under the center pumpkins. Portal axles also limit torque twist by transferring gear reduction to the wheels and away from the differentials. With less torque twist, TXC-4M is more stable and less likely to twist itself off the rocks.

Stone Claw Tires
Huge 1.3” x 2.8” Stone Claw™ beadlock tires get TXC-4M up and over obstacles easily with an aggressive stepped-block tread design that maximizes biting edges. Molded in soft-compound rubber, Stone Claw tires grab onto rocks with unrivaled traction, outperforming even the best aftermarket tires.

3s Battery and Charger Included
TXC-4M includes a powerful 3-cell LiPo battery and fast USB charger. The compact battery puts out 11.1 volts of power for nearly limitless rock-climbing torque and high-rpm trail driving. The iD™ equipped charger balances the battery perfectly every time with no complicated settings to memorize.

Features:
Clipless Tube-Frame Body:
Lightweight tube frame
Accessory panels available (sold separately)
Interior with driver figure
Hidden clipless latch in the rear
Bosses for accessory light kits (sold separately)
3s Brushless Electronic Speed Control:
Field Oriented Control (FOC)
Delivers precise throttle control
LiPo overvoltage protection
Two-stage low-voltage detection
Fully waterproof for all-weather fun
Three drive profiles
Sport Mode — forward / brake / reverse
Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
6-volt BEC
3s Brushless Outrunner Motor:
More torque and low speed control than conventional designs
3350 Kv
Laser-etched motor can
2.4 GHz Radio System:
TQ Compact 2-channel transmitter
Removable color-matched grip adapter
High-output signal delivers outstanding range
Compact receiver with servo and LED channels
Molded Monocoque Chassis:
Single piece composite design
More torsional rigidity than conventional ladder frames
Reduces weight
Battery and ESC held low in the chassis
Mounted on opposite sides for better weight distribution
Integrated rock light mounding and wire routing
Driveline:
Full-time shaft-driven 4-wheel drive
Locked axles with steel-spool gears
Steel axle shafts and U-joints
25% overdrive front axle
Heavy-duty CV center driveshafts
Single speed transmission
All metal gears
Full ball bearings
Portal Axles:
Increases center ground clearance
Reduces torque twist
All metal gears
Full ball bearings
Suspension:
Lay-down shock design
Triangulated 4 link front and rear
High-clearance lower links
Steering:
Superior 60° steering angle
Waterproof high-torque 2265 servo
Full metal gears
75 oz-in torque
Aluminum center section
Horizonal servo mounting
High-throw metal servo horn
High-clearance drag link
Direct steering (no servo saver)
Oil-Filled Aluminum GTM Pro Shocks:
Aluminum bodies in bright anodized colors
Realistic body-over-shock appearance
O-ring sealed with smooth controlled damping
Easily refreshed with available rebuild kits
Wheels and Tires:
1.3” Licensed Method Race Wheels®
3-piece Beadlock design
7 mm wheel hex
1.3” x 2.8” Stone Claw™ tires
High-grip rubber compound
Aggressive stepped-block tread design
Wide directional sipes
Battery and Charger Included:
3 -cell LiPo battery with iD®
11.1 volts
250 mAh capacity
USB-powered charger
iD technology for faster, safer charging
Sealed Ball Bearings
Durable Hex Hardware

Specifications:
Name: TXC-4M Extreme Crawler
Type: Trail / Crawler
Skill Level: 1
Scale: 1/18
Weight: 1.03 pounds (467 g)
Length: 9.22 inches (234 mm)
Width: 5.86 inches (149 mm)
Track: 5.86 inches (149 mm)
Height: 4.2 inches (107 mm)
Wheelbase: 6.6 inches (168 mm)
Center Ground Clearance: 1.7 inches (43 mm)
Driveline: Shaft-driven 4WD
Transmission: Single speed direct drive
Differential Type: Locked spool
Gear Ratio (Internal): 74.1:1
Steering Servo: 2265
Battery Compartment Specs: 41 mm L, 22 mm W, 14 mm H

Includes:
(1) TXC-4M Extreme Crawler 1/18 4WD RTR Brushless Rock Crawler
(1) Brushless Outrunner Motor (3350kV)
(1) High-Torque 2265 Metal Gear Steering Servo
(1) 3S Brushless ESC w/FOC & iD Connector
(1) 3S LiPo Battery (11.1V/250mAh) w/iD Connector
(1) TQ 2.4GHz Radio System
(1) USB-A LiPo Battery Balance Charger
Product Manual

Needed to Complete:
(4) AA Batteries for Transmitter