This is the MIP 13.5 Performance Bundle Package Gear Diff Tekno EB410

The MIP Tekno EB410 13.5 Gear Diff Performance Bundle Package is an aluminum based drivetrain system that every racer needs! This Drive System features a redesigned 2-piece Aluminum Bi-Metal Bone and Alloy Steel Yoke, 2 Front 78mm Bones & 2 Rear 69mm Bones and of course comes with MIP’s 1.5 Pucks.

MIP Pucks increase the longevity of your Drive System by reducing the wear and tear between the pins of the bone and slots of the cups. So instead of having to replace the whole bone and outdrive, simply replace the Pucks™ that sit on the pins and you are ready to race!

Most importantly, this Drive System decreases the overall rotating mass by a whopping 25%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps!

Whats New?
The new Bi-Metal Bone and Yoke now use 2 set screws to attach together with a 2x 4-40 x 3/32” set screws; using a .050” hex wrench (sold separately) to assemble, this means all the hardware uses the same wrench!

Features:
25% Less Rotating Mass
Quicker Acceleration off Corners
Quicker Deceleration
Less Overall Wear and Tear on Drive Components

Includes:
(1) MIP Confetti Sticker
(1) MIP Inst. Sheet
(1) MIP Thread Gel Safety Sheet
(1) MIP Lube & Thread Gel Cup
(2) SHSS, M4 x 3mm Cup Set Screw
(8) BHCS, 1‐72 x 1/8 Button Head, Alloy
(4) MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
(8) MIP Keyed Drive Puck, Ten SCTE
(2) MIP Pucks, 17.5 Diff Input Drive Cup, Tekno EB410
(2) MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410
(1) MIP Pucks, 17.5 Center Bone, Front 129mm, Tekno EB410
(1) MIP Pucks, 17.5 Center Bone, Rear 48mm, Tekno EB410
(8) SHSS, 4‐40 x 3/32" Cup Point
(8) BHCS, 1‐72 x 1/8 Button Head, Alloy
(4) MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
(4) MIP Bi‐Metal R‐CVD Yoke, Tekno EB410
(4) MIP SW4 Stop Washer, Losi 22
(8) MIP Keyed Drive Puck, Ten SCTE
(1) Support Parts Insert Sheet, Extra Kit Parts
(2) BHCS, 1‐72 x 1/8 Button Head, Alloy
(2) SHSS, 4‐40 x 3/32" Cup Point
(2) MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
(1) MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410
(16) MIP Keyed Drive Puck, Ten SCTE
(2) MIP Pucks, 17.5 Bi‐Metal Bone, Front 78mm, Tekno EB410
(2) MIP Pucks, 17.5 Bi‐Metal Bone, Rear 69mm, Tekno EB410
(4) MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410