Even the toughest off-road challenges have met their match with TRX-4^® Sport High Trail^™ Edition. A factory-installed Long Arm Lift Kit amplifies TRX-4 Sport’s performance-focused all-terrain capability with even more ground clearance. High-angle bumpers and fully-locked axles provide nearly unstoppable climbing versatility with the show-stopping looks of the High Trail Edition’s rugged Expedition Rack and scale accessories.

Features:
Tough, Lightweight Pickup Truck Body:
High-angle bumpers for increased clearance
Molded grille and tailgate
LED-ready headlights, tail lights
Full Nylon composite wheel wells and floor pans

Scale Accessories:
Rugged Expedition Rack with detailed accessories
Injection-molded snorkel and side mirrors

Clipless Body mounting:
Clipless design for smooth body appearance
Rugged internal body cage for added rigidity
Body details mount directly to internal frame

Trail-tuned XL-5™ HV Waterproof Electronic Speed Control:
Fully waterproof design
Five drive profiles
Sport Mode — forward / brake / reverse
Race Mode — forward / brake / no reverse
Training Mode™ - 50% forward / 100% brake / 50% reverse (patented)
Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, efficient heat sink
Wide voltage latitude 6–7 cell NiMH (7.2–8.4 V) and 2–3s LiPo (7.4–11.1 V)
Two stage low voltage protection (LVD)

Titan® 550 Motor:
Powerful Titan 21T reverse rotation motor with internal cooling fan
Precision, preset gear mesh adjustments
Motor retention separate from gear mesh

Portal Axles:
Increase ground clearance
Eliminate torque twist
Steel gears
Improve axle geometry and reduce strain on driveshafts

Drivetrain:
Full-time shaft driven 4-wheel drive
Tough 6 mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Spool-locked front and rear differentials
Steel gear transfer case

Factory-Installed Long Arm Lift Kit:
Increases ground clearance over 1″
Maintains precise steering geometry
Accommodates oversize 2.2″ wheels and tires
TQ™ 2.4 GHz 2-Channel Radio System:
Ergonomic transmitter with internal antenna
Traxxas 6519 3-channel micro receiver with fail-safe security
Patented O-ring sealed watertight receiver box keeps the micro receiver dry

Reinforced Steel Ladder Frame:
Full-length 1.5 mm thick steel frame rails
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips integrated into frame rails

Innovative Battery Compartment:
Hinged battery strap allows quick and easy battery access
No pins to lose
Accommodates different height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)

Transmission:
Single-speed with steel gears
Dual horizontal shafts
Twin friction plate slipper clutch
Easily removed for servicing

Steering:
Chassis mounted 2075X metal gear digital servo
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry corrected for bump steer

Suspension:
Front — 3 link with panhard
Rear — Triangulated 4 link
Heavy-duty rod ends with steel hollow balls
5 mm diameter steel link rods with 4 mm threaded ends

Extended Aluminum GTS Shocks:
Oil-filled coilover GTS shocks
Extra-long aluminum bodies for greater articulation
Silver-anodized aluminum bodies
Threaded bodies with collars easily adjust ride height
Silky smooth damping for the toughest trails
O-ring cap seal and dual X-ring shaft seals

Oversize Wheels and Tires:
2.2” 5-spoke wheels with replica beadlock rings
Pre-mounted 2.2” Canyon Trail tires with trail-tuned foam inserts
Trail tuned S1 rubber compound
12 mm steel hex

Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating
Requires Battery and Charger (Sold Separately)

Specifications:
Scale: 1/10
Model Name: TRX-4 Sport High Trail Edition
Model Type: Trail / Crawler
Model Skill Level: 1
Chassis: Steel ladder frame
Weight: 7.04 lb (3.20 kg)
Length: 22 inches (564 mm)
Width: 10.63 inches (270 mm)
Front Track: 10.63 inches (270 mm)
Rear Track: 10.63 inches (270 mm)
Height: 10.8 inches (275 mm)
Wheelbase: 12.28 inches (312 mm)
Center Ground Clearance: 4 inches (99 mm)
Drivetrain: Shaft-driven 4WD
Transmission: 2-speed high/low, remote shifting
Differential Type: 4 gear, remote locking
Gear Pitch: 32 pitch
Servo(s): 2075X metal gear, digital high-torque waterproof
Radio System: TQi™ 2.4 GHz 4-channel transmitter with 6533 receiver
Battery Compartment Specs: 159 mm X 47 mm X 23 mm, 26 mm

Needed to Complete:
(1) NiMH Battery (4-7 cell) or LiPo Battery w/iD Connector (2S/3S)
(1) Compatible Battery Charger
(4) "AA" Batteries (for transmitter)