Hot Racing
Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T) (HRAERVT46M01)
$29.88
(0)
Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
FEATURES:
CNC machined hardened steel construction
Black oxide finished
Laser etched tooth count marking
YOU WILL RECEIVE:
(1) 50T, 1 mod steel spur gear
REQUIREMENTS:
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
SPECIFICATIONS:
Overall diameter: 52.8mm
Gear face width: 8mm
COMMENTS:
Upgrade for factory plastic 6448 or 6448X 54T spur gear
Hot Racing
(0)
Hot Racing
(0)
Robinson Racing
(0)
