This is the Hobbywing EZRun MAX5 V3 Sensorless Brushless ESC & Motor Combo w/56113SL (800kV) for your large scale 8S Cars and Trucks.

Features:
Strong Power: With a fast acceleration response and a rock-solid, stable output, the EZRUN 5687/56113 motor can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain.
Thermal Protection*: When pairing the EZRUN 5687/56133 motor with the Hobbywing upgraded MAX6/MAX5 ESC, the built-in temperature sensor & port will effectively prevent the motor from being damaged due to overheat and prolong its service life . *Note: The built-in temp. sensor will be available through HOBBYWING MAX5/MAX6 ESC in the future model
High Efficiency: Hobbywing’s temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an efficiency rate of up to 90% (an industry-leading level).
MAXIMIZED EFFECT: When pairing the EZRUN 4985/5687/56133 motor with the Hobbywing EZRUN MAX5/MAX6 ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band. (*Note: MAX5 pairs with 5687/56113, MAX6 pairs with 4985)

Easy programmable features by WiFi Module (IOS & Android) or LCD Program box - Purchase separately

ESC Features:
Compatible with sensorless brushless motors and sensored brushless motors (only in sensorless mode).
Fully waterproof design for all weather conditions.
Super internal switch-mode BEC with switchable voltage of 6V/7.4V and a cont. /peak current of 6A/25A for easily driving big torque servos and high voltage servos.
Highly reliable electronic switch avoids troubles which may happen to traditional mechanical switch due to dirt, water, dash and etc.
The built-in spark-proof circuit effectively protects not only battery and ESC connectors from damage but also users from physical injury (to hands) caused by strong electrical sparks
produced at the battery and ESC connecting moment.
Separate programming port to easily connect the LED program card or the LCD program box to the ESC. (purchase separately)
Proportional brake with 9 levels of brake amount/maximum brake force and 9 levels of drag brake force.
5 levels of acceleration /punch from soft to aggressive for different vehicles, tires and tracks.
Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail-safe (throttle signal loss protection).
Capacitor Protection(Only MAX5)： Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC because of overload.
Single-button ESC programming and factory reset.

ESC Specifications:
Continuous Current: 200A
Peak Current: 1,300A
Motor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode)
Applications: 1/5th Touring Car, Buggy, Truggy and Truck
Motor Limit: With 8S LiPo/24-Cell NiMH: KV ≤1000 (58110 size motor)
LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller)
Size (LxWxH): 93.35x58.12x47.81mm
Weight: 342g
Programming Port: FAN /PRG Port

Motor Specifications:
Model: 56113-800KV
Pole: 4
KV (No-load): 800KV
Resistance: 0.00049 Ω
Current (No-load): 3.2 A
Max. Output Power: 5800 W
Current at the point of M.O.P: 200 A
Motor Diameter: 56mm
Motor Length: 113mm
Shaft Diameter: 8.0mm
Shaft Length: 31.0mm
LiPo Cells: 3-8
Weight: 1210g (42.68oz)
Application: 1/5th RC Vehicles, Truck/Dragster

Includes:
(1) Ezrun MAX5 ESC
(1) EzRun 56113 800KV Motor or Ezrun 5687SL 1100kv motor
(3) 10 AWG, 200C Black wires for a brushless motor
(1) 8 AWG 200C RED power wire
(1) 10 AWG 200C Black power wire
(1) Double side tape
(2) Heat shrink tube
User's manual
A HOBBYWING decal