The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1:10th scale buggies and trucks, the ROAR APPROVED Mamba X also delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors.

This combo is a Mamba X ESC and 1515 1Y 2200kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than ~45 MPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo (CSE010-0145-03).

ESC Features:
ESC voltage range 2S-6S
Waterproof
8A Adjustable BEC (5.25V-8.0V)
Data-logging
Rugged CNC Aluminum Case
Castle Link Programming Support
Convenient Transmitter Programming
Auxiliary Wire Functionality for "on-the-fly" adjustments
SmartSense™Technology
Integrated Capacitors
Removable 30mm Cooling Fan
Integrated 4mm Bullet Connectors
12 AWG Power Wires
Waterproof Switch
Audible Alerts and LED Alerts for easy diagnoses of common issues
ROAR Certified and RECON G6 Certified ESC

MOTOR Features:
4-POLE 12-SLOT Rebuildable Design
QUIETSENSE™ Technology
High-Performance 0.2mm Steel Lamination Stacked Stator
High-Strength, 180° C Grade, Neodymium Sintered Magnets
210mm length Sensor Wire
Silicone coated sensor board
Oversized NMB Bearings
M3 and M @ 25mm Mounting Hole
4mm male Castle Bullet Connectors
ROAR Standard Sensor Port and Labeled Connections
High-Strength Kevlar Wrap
Oversized, Low-Resistance, Gold-Plated Solder Tabs
SmartSense™Technology

Technical Specs:
ESC:
Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (Max 4s with included motor)
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes
Cooling Fan: Yes, factory equipped (30mm), fully removable
Size: 2.14x1.39x1.18" (54.4x35.2x30.0mm)
Weight (with wires): 3.56 oz. (101g)
Connectors: 4.0mm female bullets for motor connection.
Items Needed for Operation: Battery Connector required
Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. SW VS. 1.82 ROAR APPROVED
Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software
Telemetry Link Capable: Yes

Motor:
Input Voltage Range: 3-6S LiPo; 4s maximum with Mamba X ESC
Kv: 2200
Max. RPM: 60,000
Size: Length: 75.4mm Diameter: 40mm (41.4mm with fins)
Weight (w/wires): 429g / 15.1oz
Shaft Size: Length: 20mm Diameter: 5mm
Mounting Hole Specifications: M3 and M4 @ 25mm
Cooling Fan: Optional
Connectors: 4mm male Castle Bullet Connectors on 12AWG wire, includes 210mm length sensor wire.
Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs on 4s LiPo.

Tech Notes:

Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
Applying voltages higher than 25.2V will cause irreparable damage to ESC.
We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs

Includes:
Mamba X ESC with Sensor Harness
1515-2200Kv sensored motor
Coupon for free Castle Link USB
Mamba Decals
Driver's Ed and Quick Start Guide
Gearing Chart for Castle Motors