AKA Impact 1/8 Buggy Pre-Mounted Tires (2) (Yellow) (Soft - Long Wear) (AKA14007XRY)

AKA

was $47.19

$39.99
(You save $7.20)

Out of stock

Part#
AKA14007XRY
(No reviews yet) Write a Review
AKA Impact 1/8 Buggy Pre-Mounted Tires (2) (Yellow) (Soft - Long Wear) (AKA14007XRY)
Out Of stock
  • Write a Review
  • Print

The IMPACT tire features a dense small square lug pattern with offset lug rows in the center of the tire to deliver maximum forward traction and good wear characteristics. The two outer rows of lugs are parallel to create a circumferential groove at the edge of the tire to give the tire very predicable side bite. This allows the car to rotate in the center of the turn while still feeling very stable and predictable. The IMPACT is built on AKA's latest carcass design featured on our ENDURO and WISHBONE tires. Super Soft long wear is developed to work in colder conditions where the track either has an abrasive surface or a surface that gets very polished which creates lots of wheel spin and therefore more wear. This compound will be popular in the winter months where drivers are still competing on outside tracks in cold weather.

This comes pre-mounted with foam inserts.

Features:
EVO Wheel: R-Line pre-mounts feature our EVO wheel which is designed to withstand the higher G-loads of modern 1:8 buggies with less deflection without giving up durability. You can also use the optional wheels stiffeners (34003Y or W) to further stiffen the wheel but still have a wheel that is the same weight as a standard wheel.

Red Insert (Soft): R-Line pre-mounts also feature our new soft red insert. The red insert is designed to soak up the big bumps with its fluted I.D. while still holding its shape in the turns to increase corner speed and consistency.

Tread Performance - Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.

Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.

Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.

Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt we have the best pre-mounts in the industry.

 

Includes:
(2) AKA Impact 1/8 Buggy Pre-Mounted Tires

 

Related Products