Associated ASC9041 Factory Team B4.2 2WD Competition Electric Buggy Kit

Associated ASC9041 Factory Team B4.2 2WD Competition Electric Buggy Kit

This is the 1/10 scale electric powered, radio controlled, Associated RC10 B4.2 Factory Team off-road buggy kit.

FEATURES:

• Chassis: +8mm B4 composite tub type
• Drive: Two wheel with CVA drive shafts with pin retainer clips with steel center-drilled front axles
• Transmission: 2.6:1 laydown type, high-torque capacity with VTS slipper clutch (variable torque, multi-plate slipper with 3 drive surfaces)
• Ball Bearings: Full set, 14 rubber sealed
• Shocks: Factory Team 12mm Big Bore hard anodized aluminum with TiN "Gold" 3mm shock shafts
• Shock Towers: Optimized for the Big Bore shock
• Motor Plate: Factory Team blue aluminum milled construction
• Differentials: Ball type with lightweight outdrives
• Spur Gear: Plastic, 81 tooth, 48 pitch
• Wheels: Plastic yellow dish type front, 0.94" (24mm) wide, 2.4" (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
• Wheel Hexes: Factory Team front and rear 12mm blue aluminum clamping type
• Body: ProLine Bulldog
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top
• Suspension: Optimized for use with LiPo batteries, mounts for 4°, 3.5°, 3°, and 2.5° rear toe
• Turnbuckles: Factory Team blue anodized titanium turnbuckles
• Front axles: Steel center drilled
• Steering: Factory Team aluminum bellcrank,
• Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring
• Battery Strap: Carbon fiber with blue aluminum thumb screws

INCLUDES:

• Associated RC10 B4.1 Factory Team off-road buggy kit,
• Clear Pro-Line Vortex body with wing,
• Decals,
• Wheels
• Shock oil
• Instruction manual

REQUIRES:

• Radio: Two-channel with high-speed servo
• Radio Batteries: (8) AA size
• Pinion Gear: Number of teeth to be determined by motor
• ESC & Motor: 540 size Brushed or Brushless for buggy applications.
• Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
• Battery Charger: To match selected battery
• Building and track equipment

SPECS:

• Vehicle;
• Length: 15.16" (385mm)
• Width: varies with type of tires used
• Weight: 3.4lbs (1530g) running weight will vary depending on parts installed
• Wheelbase: 11.1" (281mm)
• Internal Gear Ratio: 2.6:1
• Body:
• Length: 11.3" (287mm)
• Width: 5.5" (140mm)
• Height: 2.9" (73mm)