Mugen MUGE2001 Mugen MBX7 1/8 Off-Road Competition Buggy Kit

Mugen MUGE2001 Mugen MBX7 1/8 Off-Road Competition Buggy Kit

SKU: MUGE2001
$589.99
Price: $589.99
Mugen MUGE2001 Mugen MBX7 1/8 Off-Road Competition Buggy Kit
$589.99
Earns 589 Points

Mugen MUGE2001 Mugen MBX7 1/8 Off-Road Competition Buggy Kit

This is the glow powered, radio controlled, 1/8 scale Mugen MBX7 Off Road Buggy Kit.

FEATURES:

  • Chassis: A7075 hard anodized aluminum 0.12" (3mm) thick
  • Receiver Box: Molded composite construction, relocated for better CG
  • Drive: Four wheel three differential shaft drive
  • Shocks: Four 15mm oil filled hard anodized aluminum body, shortened front shock bodies with redesigned front and rear boots
  • Front Shock Tower: 0.20" (5mm) A7075 aluminum with optimized geometry
  • Rear Shock Tower: 0.16" (4mm) thick A7075 aluminum
  • Gearbox: Sealed, front and rear
  • Differentials: Planetary geared Fuel Tank: 4oz (120cc) approximate
  • Transmission: Single-speed
  • Ball Bearings: Full set
  • Suspension: 5mm A7075 aluminum mounts with redesigned upper and lower front and rear suspension arms and uprights
  • Body: Clear buggy type with white molded plastic high downforce wing with slider system for more or less downforce
  • Brake: Dual disc with new brake cam and new front and rear linkage
  • Clutch: 3-shoe, E0710 heavy duty aluminum clutch shoes
  • Clutch Bell: 13 tooth steel
  • Spur Gear: 46 tooth
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bell-crank type, with carbon graphite steering brace and adjustable Ackerman. Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns

INCLUDES: Mugen MBX7 Off Road Buggy Kit with clear buggy body, white plastic rear wing, decal sheet, window mask sheet, air filter, illustrated instruction manual, silicone shock oil and diff oil

REQUIRES: Engine: .21 cu in rear exhaust Exhaust: Tuned pipe with manifold Radio: 2-channel with standard servo for throttle and high torque servo for steering Starter Box: For 1/8 scale buggy use Fuel, glow starter, building and track equipment

SPECS: Vehicle Width: 12.2" (309mm) Wheelbase: 12.4 - 12.6" (315 - 320mm) adjustable Gear Ratio: 11.98:1 Weight: 7.4lb (3,370g) Body- Length: 13" (330mm) Width: 7.9" (200mm) Height: 3.7" (94mm)

 

0
Your rating: None

Customers who bought this product also viewed:

GsHobby Blog Form